Interzinc B. Storage Conditions: All painting materials shall be stored in a clean, dry, well ventilated place, protected from sparks, flame. A three component, metallic, zinc rich epoxy primer which passes Slip B coefficient. Interzinc B complies with SSPC Paint 20 and contains minimum 80%. Interzinc Call for Price. A two component high solids, low VOC metallic zinc- rich epoxy primer formulated on proprietary polymer technology which provides.
|Published (Last):||3 June 2015|
|PDF File Size:||17.17 Mb|
|ePub File Size:||10.71 Mb|
|Price:||Free* [*Free Regsitration Required]|
Company specializing in applying the work of this section with a minimum of three 3 years documented experience and certified by the manufacturer. The Manufacturer’s quality management system must be interznc and registered by an independent registrar as conforming to the requirements of ISO Provide primer cut interzinf areas a minimum three 3 inches 76mm from bolted connections and minimum twelve 12 inches mm from welded connections. Maintain environmental conditions temperature, humidity, and ventilation within limits recommended by manufacturer for optimum results.
Protect adjacent areas from over spray of coating material.
Substrate and air temperature shall be in accordance with the manufacturers requirements. Wood, plaster, concrete, concrete masonry walls, ceilings, soffits, walkways, curbs, steps. Delete the next paragraph if not applicable.
No coating material may be procured or delivered to onterzinc project site prior to the review and acceptance of the proposed materials interzin the Architect in writing.
International Paint, LLC, which is located at: International Protective Coatings is the leading supplier of high performance Protective Coatings and forms part of Akzo Nobel, a market driven, technology based company specializing in Coatings, Chemicals and Pharmaceuticals.
Temporary protection and heat shall be maintained at this minimum temperature for 24 hours before, during and 24 hours after material application. Store materials in strict accordance with manufacturers documented interzincc. High Performance coatings applied in the field with Company specializing in manufacturing products listed in this section with a minimum of ten 10 years documented experience. Pipes, ducts, conduits, hangers and supports, equipment, and equipment enclosures exposed to view in all rooms and spaces except mechanical rooms, electrical rooms, and utility rooms.
Marine, offshore and coastal areas with high salinity. Steel substrate interzinnc shall be a minimum of 5 deg F 3 deg C above the dew point of the surrounding air for a period of 24 hours prior and during the application of the material.
Interzinc – A k i r a
Coating will be a complete system from a single source consisting of primer and topcoat. Clean substrate free of dust, dirt, grease or other foreign substances that would impair the bond of the coating.
Apply material at the required dry film thickness. The relative humidity of the application area shall not exceed a maximum of 85 percent for 24 hours prior, during and 24 intsrzinc after the application of the material. Interior chemical processing areas and swimming pools.
Low Atmosphere or Interior Applications – Rural area, low pollution, dry intrrzinc.
If necessary for job schedule, the General Contractor shall provide enclosures and heat to maintain proper temperatures and humidity levels in the application areas. Grind smooth all weld spatter and defects prior to commencement of coating application.
Moderate sulpher diuoxide levels. A copy of the transport document and manufacturers conformance certificate shall be attached to the material delivery QC form. The following is one example of how a mock-up on a large project might be specified.
Equipment and application procedures must conform to the coating manufacturer’s application instructions. Mild Atmosphere Applications- Urban and industrial atmospheres. Items specified or provided with factory finish; materials and products having factory-applied primer are not considered factory finished.
Submit manufacturer documentation that the fireproofing product complies with the specified contract requirements. All batch number, product identification and quantities shall be recorded on appropriate QC documents. Areas will be designated by the Architect.
Do not proceed with remaining work until workmanship, color, and sheen are approved by Architect. Requests for substitutions must be made 30 days prior to submittal and contain the full name of each product, descriptive literature, testing data collected from industry consensus standard testing, data on past performance, manufacturer’s instruction for use and generic type.
Information must demonstrate equivalence of product and performance to the specified material and complete systems. Store and dispose of hazardous materials, and materials contaminated by hazardous materials, in accordance with requirements of local authorities having jurisdiction. Provide a mock-up for evaluation of surface preparation techniques and application workmanship.